Description
Have power on hand when you need it. This ATS Car Starter Power Bank can be used either as Vehicle emergency jump starter or to charge mobile electronic devices. This all in one 9000mAh power bank is equipped with LED Flashlight and have also USB Port outlet for charging your smartphone or tablet when needed. Anti-Voltage Feedback Prevention & Polarity Protection allows you easily and most important, safely, jumps start your car in case of an emergency. 2.1A car charger with Micro USB cable can be used to recharge the power bank or other devices while on the go so you can be always ready to what may come. Leave it in the car for emergencies or take the power bank with you as a backup power. Come in a convenient storage Travel Case.
Main features
- 9,000 mAh High Capacity Battery
- Battery status indicator
- Emergency LED Flashlight
- Voltage Feedback Prevention & Polarity Protection
- Universal Compatibility - supports cars up to 4.7L gas engine (12V)
- 2.1A car charger & micro USB cable included
- 5 Years Warranty
Specifications
- Model: ATS- CS2
- Barcode EU: 0634065866402
- Barcode IL: 7290107866026
- Capacity: 9000mAh
- Input: DC 12.6V/1000A
- Output 1: (USB) DC 5V/2.4A(max)
- Output 2: (Car jumper) DC12V/200-400A
- Package Includes:
- Jump Start 9000 mAh Power Bank
- Jumper Cable with Built-In Polarity Protection
- 2.1A Car Charger
- Micro USB Cable
- User Manual
- Storage/Travel Case
Compatibility
- Car Compatibility: supports cars up to 4.7L gas engine (12V)
- Power Bank USB port & 2.1A Car Charger: Universal. Compatible with Micro USB / Lightning / Type-C devices Such as Samsung Galaxy Series, Samsung Galaxy Tab series, Apple iPhone/iPad/iPod, HTC, LG, Motorola, SONY, NEXUS, ZTE, OnePlus 2 and more.
*lightning/ Type-c Cables are not included
Instructions
HOW TO JUMP START 12V VEHICLE WITH PORTABLE JUMP STARTER:
- Plug the blue cord jumper cable into the jump start socket, and ensure the blue plug is secured.
- Connect the red battery clamp of jumper cable to the vehicle’s positive (+) battery terminal and connect the black battery clamp of jumper cable to the vehicle’s negative (-) battery terminal.
- Caution! Do not connect the red clamp (+) and the black clamp (-) at the same time.
- Ensure the battery clamps are connected correctly, and the connectors are free from rust and dirt.
- Press shortly on the power button that on the power bank.
- Wait few seconds and then start the vehicle.
- Once the vehicle starts, remove the jumper cable from the unit
*Please reference user manual for full instructions and warnings.
